Forums - Cannot Debug: Error in services launch sequence

2 posts / 0 new
Last post
Cannot Debug: Error in services launch sequence
steven
Join Date: 26 Feb 20
Posts: 14
Posted: Tue, 2020-06-09 14:36

Hello,

I can build and flash images, but I can not get debugging to work. I use all the suggested tools and read through the manual and steps serveral times. Can someone point me in the direction of what I might be doing wrong? 

I get the following error:

Error in services launch sequence
Launching command [C:\Program Files\OpenOCD-20170821\bin\openocd.exe -c gdb_port 3333 -c telnet_port 4444 -c tcl_port 6666 -f C:\qca4040-or-3-2\target\quartz\demo\Onboard_demo\build\gcc\qca402x_openocd.cfg -c echo "Started by GNU MCU Eclipse"] failed.
Launching command [C:\Program Files\OpenOCD-20170821\bin\openocd.exe -c gdb_port 3333 -c telnet_port 4444 -c tcl_port 6666 -f C:\qca4040-or-3-2\target\quartz\demo\Onboard_demo\build\gcc\qca402x_openocd.cfg -c echo "Started by GNU MCU Eclipse"] failed.
Cannot run program "C:\Program Files\OpenOCD-20170821\bin\openocd.exe": Launching failed
  • Up0
  • Down0
c_rpedad
Profile picture
Join Date: 18 Jun 18
Location: San Jose
Posts: 317
Posted: Thu, 2020-07-30 15:09

Kindly refer to https://developer.qualcomm.com/hardware/qca4020-qca4024/tutorial-videos for detailed tutorial of CDB20 tutorial how debugging is verified.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.