Forums - HDK8450 get into 9008 mode

3 posts / 0 new
Last post
HDK8450 get into 9008 mode
xinyu.wu
Join Date: 15 Feb 23
Posts: 2
Posted: Wed, 2023-04-12 00:03

Dear Experts,

After excutive commant "fastboot set_active b"  and try to boot the device  from slot b.  The HDK8450 board  can't be booted up and has no response even I pressed the button "PON" & "VOL-" for a long time, the serials port also doesn't print any log. When  I connect the USB into Windows PC, it shows the board is in the 9008 mode.

From the document "80-NN120-1SC"  i  found the QFIL's "flat build" mode to flash the  ufs may save the development kit. Counld you please help me to locate the cause and provide the download link of programmer package?

Thanks in advance.

  • Up0
  • Down0
handzhu
Join Date: 6 Jun 22
Posts: 55
Posted: Wed, 2023-04-12 19:45

we do not have download firmware here, maybe you can ask sales and marketing to get the frimware.

 

  • Up0
  • Down0
xinyu.wu
Join Date: 15 Feb 23
Posts: 2
Posted: Sun, 2023-04-16 18:59

Thanks for your support.

I bought the development kit from Qualcomm official website sales center, so where can i contact with sales and marketing? Can you provide me with a web link or email address?

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.