Goal : My goal is to view the logging data in my PC when the CSRMeshLight application is running
1. I am using DK-CSR1010-10184-1B kit.
2. Enabled logging in CSRMeshLight code by setting the macro DEBUG_ENABLE
3. Connected to board via SPI programmer interface board given in the KIT
4. Opened a putty connection with port as COM10 (as displayed in device manager)
5. Buad rate - 2400 , Data bits - 8,Stopbits -1,Parity - None,Flow Control - None
I am unable to see any logging data in my terminal. I could see the code hitting at DEBUG_STR,DEBUG_U8 methods, but not able to see any data on the terminal.
Can you please help me to resolve this problem