Forums - OTA programming

2 posts / 0 new
Last post
OTA programming
Join Date: 22 Jul 16
Posts: 1
Posted: Fri, 2016-07-22 05:38


I have a CSR bluetooth dongle that I have been using along with the CSR uEnergy Over-the-Air-Updater tool.

I was hoping to autmate this process in our factory.  Are there any libraries available where I can create my own automated version of this tool?






  • Up0
  • Down0
Profile picture
Join Date: 4 Mar 15
Location: IoT consultant, Cambridgeshire, UK
Posts: 21
Posted: Tue, 2016-07-26 07:23

Hi Brent,

The source code is provided. For instance, you can find it here: C:\CSR_uEnergy_SDK-\otau_demo\source

But it will be slow compared to the equivalent wired reprogramming: on a similar project I worked on a few months ago there was a requirement that no factory operation took longer than 60s so we wrote a customised SPI tool to program, configure, test.

Good luck!


  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.