When I download CSR µEnergy SDK software, system asks a activation code. Where should we get it?
When I download CSR µEnergy SDK software, system asks a activation code. Where should we get it?
Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.
Have you bought the development kit ?
Its printed on the development kit box.
Hello where i can download the SDK? been looking every where cant find it.
Have a look at https://developer.qualcomm.com/hardware/csr101x/tools/activation-codes. This will help with getting access to the SDK.
Thanks, i tryed that one the problem is a little more complex maybe i am thinking of starting a new thred. this is what happend maybe you can helpme.
So i Bought this dev kit:
https://www.lm-technologies.com/product/bluetooth-smart-development-and-...
from this seller :
https://www.top-electronicsusa.com/lm531-0644-programming-development-ki...
when it arrived, was only the lm53x board and a the BT module NO box NO code for the CSR uENERGY tool kit SDK, i got in touch with top-electronics support and they told my that i have to buy the CSR spi programmer from digikey and with that board i could program and get access to the SDK:
https://www.digikey.com/product-detail/en/qualcomm/DK-USB-SPI-10225-1A/D...
and that is where i am now. but i cannot find the way to get the SDK hope someone can point me in the right direction.
Purchasing the USB-SPI kit at https://www.digikey.com/product-detail/en/qualcomm/DK-USB-SPI-10225-1A/D... will not get you access to the SDK. The Qualcomm development kits listed at https://developer.qualcomm.com/hardware/csr101x/tools/activation-codes provide you access to the SDK. If the hardware you purchased at https://www.lm-technologies.com/product/bluetooth-smart-development-and-... does not provide the SDK to modify "the LM53X for the programming of application firmware or modifying LM application firmware." then I recommend you contact Qualcomm sales closest to you at https://www.qualcomm.com/contact/sales and explain this situation to see if they can help you around this to get access to the SDK.
Thanks, for the anwers. After a few email with the people of LM and Top they helpme to solve the issue.
https://www.digikey.ch/catalog/en/partgroup/bluecore-csr8675-bga-develop...
I need assistance to find/download a right program to start my projects.The product came without software for programming.
In Digi-key website written, it is easy to start, but I do not think so. Now I am one-week searching for assistance.
My goal is to programming the projects to the dev kit.
The CSR8675 is not supported by this forum. Allow me to provide some suggestions to help get you started. The software for the CSR8675 is under a license that can be purchased at https://www.digikey.com/products/en?keywords=DL-BDEV-10002-1A-ND. I recommend reaching out to sales in your area, https://www.qualcomm.com/contact/sales, or Distributors/Providers/Reps in your area, https://www.qualcomm.com/contact/distributors, as they will be able to provide a path for your support moving forward.
I can't find or download the sdk in the link,
there are many SDK documents rather than SDK, int the CreatePoint ,I just find CSR102x sdk.
Where can i get the SCR101x sdk.
Thanks for any help
Can you try to download the SDK from https://developer.qualcomm.com/hardware/csr101x/csrmesh-development-kit/...click on CSR1010 SDK Installer link. You will need to register at CreatePoint. Please post here if you encounter problems.
PLEASE PROVIDE LINK TO DOWNLOAD CSR UENERGY, ALL VERSIONS NEEDED.
Qualcomm, since you bought CSR you have moved all the files, documentations, apps and every thing for the CSR downloads need to be digged from the earth like diamonds. please fix this issues and take care of the company most needed tools!!!!
see this:
https://developer.qualcomm.com/hardware/csr101x/csrmesh-development-kit/...
CSR1010 SDK Installer - ITEM NOT FOUND error!