I manage to build RB5 HLOS image using code from Chipcode and Code Aurora. I built in the qti-distro-rb-perf mode. Then I follow the release note and use fastboot to flash the images onto the board using the following command:
#adb reboot bootloader
#fastboot flash abl_a abl.elf
#fastboot flash abl_b abl.elf
#fastboot flash persist persist.img
#fastboot flash system_a system.img
#fastboot flash system_b system.img
#fastboot flash userdata userdata.img
#fastboot flash boot_a boot.img
#fastboot flash boot_b boot.img
#fastboot reboot
But after I flash the device, the device can no longer boot anymore. Any idea what could be happening? Do I need to flash the CDT as well?
Hi Da.teng,
Boot issues might be related to CDT being erased/corrupted.
We saw this while switching back and forth between different builds (Linaro <--> LE <--> LU).
Re-flashing the CDT resolved the issue for me, can you please try to re-flash the CDT?
Best Regards,
Rajan.
Hi Rajan,
Thanks for the information! I didn't manually flash the CDT myself. What I did was I flashed the LE build that came with the SDK-manager 2.1.0. After that, I flashed the image I built myself from LE source and the device is now able to boot again.