Hi All,
We are planning to use QCA9377-3 type 1PJ along with iMX8M Mini running Yocto Linux L5.4.24-2.1.0 and/or L5.4.47-2.2.0.
Would like to know that; are following features supported in the software stack provided by you for above combination:
Hi All,
We are planning to use QCA9377-3 type 1PJ along with iMX8M Mini running Yocto Linux L5.4.24-2.1.0 and/or L5.4.47-2.2.0.
Would like to know that; are following features supported in the software stack provided by you for above combination:
Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.
Hi Prashant,
Here is the feature status:
80+80 MHz Channel bandwidth : NO
WiFi 802.11ax (WiFi 6) : NO
1024-QAM : NO
160 MHz BW for both 2.4 GHz and 5GHz : NO
DL & UL MU-MIMO both 2.4 GHz and 5GHz : NO
8x8 MIMO both 2.4 GHz and 5GHz : NO
WiFi 802.11ay (WiGig, 60GHz WiFi) : NO
EAP-SIM support : YES
Wi-Fi Mesh capability (WFA easy Mesh) : NO
Proprietary WiFi mesh operation : NO
User interface options to Enable / Disable WiFi : YES (it's user implementation)
SSID name and password unique to each unit : YES (it's user implementation)
SSID shall be 3UK defined branding + unique ID (+ frequency) : Please provide more details what this feature is??
SSID frequency element, if implemented, to be "2.4GHz" and/or "5GHz" : Please provide more details what this feature is??
External labelling of SSID and password : YES (it's user implementation)
Encryption enabled by default : NO
WiFi auto channel selection & reselection for hotspot : ACS is supported. Automatics reselection isn't supported.
User options to manually set WiFi parameters: YES (it's user implementation)
SSID name : YES (it's user implementation)
SSID Broadcast on/off : YES (it's user implementation)
WPS support : YES
User interface options to enable / disable WPS : YES (it's user implementation)
WiFi diganostics: environment scan, surrounding hotspot list. : NO
Please share more details on the 2 issues so we can let you know if they can be supported.
Thanks.
Hi Prashant,
>>1. Does it have separate SSID for each band 2.4 and 5GHz? Means to be able to configure one SSID per band, so that separate rules can be set including bandwidth, access restrictions for each SSID.
[QC] It's a user configurable thing. QCA9377 will support setting different SSIDs in 2.4 and 5 GHz in AP+AP mode.
[QC] 2.4G and 5G are 2 different bands and when device is in one band, it can't listen what's happening in the other band. It's universal with any WiFi device.
Hi Prashant,
Please find below Answer:
Dear Deepak,
Can you please confirm the driver support for Linux kernel version 5.4.24/ 5.4.47 on i.MX8 platform?
Will Qualcomm provide the porting procedure of QCA9377-3 drivers on i.MX8 platform?
Regards,
Barath.S
Hi Barath,
>Can you please confirm the driver support for Linux kernel version 5.4.24/ 5.4.47 on i.MX8 platform?
Current driver may not support. You would need to port it.
>Will Qualcomm provide the porting procedure of QCA9377-3 drivers on i.MX8 platform?
Porting procedure is common for any 3rd party platform. Please see the porting guide we already provide.
Thanks.
Hi Deepak,
Thank you for the information.
We would also like to know the interface of Bluetooth. As per datasheet we could see that BT has UART/PCM interface.
Could you share us information on using PCM interface for BT. Does the driver provided for NXP platform has support of PCM interface?
Regards,
Barath.S
Hi Deepak,
Can you please reply on the above query about using the PCM interface for BT in QCA9377-3.
Please provide any supporting information on the same.
Regards,
Barath.S
Dear Customer,
BT is using UART Interface.
Regards,
Matadeen Mishra
Hi All,
I am writing BT-BLE service.
So need your help to get sample programs in C language/shell scripts to handle following calls:
1. Agent is ON
2. Received authorization request
3. Received connection request
4. Bonded/paired
5. Connected
6. Advertizing
7. Registered service
How to get notificatons/callbacks for above calls?
Thanks,
Prashant
Hi Prashant,
Could you please share which Stack you are using?
Fluoride? or BlueZ?
Regards,
Matadeen Mishra
Hi MM,
It is BlueZ. It has come as a default in Yocto.
Regards,
Prashant
Hi Prashant,
Sorry we don't have any progoram in C or shell script to support Bluez stack.
you need to develop by your own.
Regards,
Matadeen Mishra
Hi All,
On my target board following libraries are available:
/lib/firmware/qca9377/
Prashant,
All these files are FW files for WLAN and these are complete list of FW files. If they are present, WLAN will work as expected.
Let us know if you have further questions.
Thanks.
Hi Team,
We would like to know the use procedure for Concurrent operations of WIFI STATION+AP Mode with BLE in Linux 5.4.7 kernel.
What are the specific commands and configuratiion files to be used for achieving concurrent operation and also handling the connections?
Also request to share the driver source path for the same.
Regards,
Barath.S
Hi Barath,
The default interface that's created as wlan0 is a STA interface.
You can use below command to create a concurrent AP interface, ap0:
#iw dev wlan0 interface add ap0 type __ap
You may need to delete the default p2p0 interface before creating ap0 interface:
#iw dev ap0 del
For BLE, someone from BT Team would respond.
Thanks.
Hi Barath,
For BLE, someone from BT Team would respond.
--> From BT no configuration is required, it should be work straight forwared.
Regards,
Matadeen Mishra