I am connecting a M.2 PCIe card to the RB5 kit through an adapter board - the interface is PCIe Port 2.
HS2-19 (GPIO 85) PCIE2_RST_N
HS2-21 (GPIO 86) PCIE2_CLK_REQ_N
HS2-23 (GPIO 87) PCIE2_WAKE_N (not connected)
HS3-14, HS3-16 PCIE2_REFCLK_M, PCIE2_REFCLK_P
HS3-18, HS3-20 PCIE2_RX0_M, PCIE2_RX0_P
HS3-22, HS3-24 PCIE2_RX1_M, PCIE2_RX1_P
HS3-26, HS3-28 PCIE2_TX0_M, PCIE2_TX0_P
HS3-30, HS3-32 PCIE2_TX1_M, PCIE2_TX1_P
Hi,
Based on your description, it looks like the connections are correct.
It may be that a driver is missing to start the communication. I'll try to find out if the PCIE drivers were included with the latest release.
Hope this helps.
Hi C.H.Chee
Do you have boot-up log, our hardware engineer need it.
Please capture boot-up log.
Thanks
Kevin
Hi,
can you share rb5 adapter board for pcie/m.2 adapter or where one could purchase?
Let me check hardware team and get back to you
checked with hardware engineers, you may buy pcie/m.2 adaptor any where. Can you try to serach at Amzon, best buy online
checked with hardware engineers, you may buy pcie/m.2 adaptor any where. Can you try to serach at Amzon, best buy online
Hi,
There are many M.2 NVME pcie USB to M.2 adapters. But we need to test the RB5 PCIe x 2 interface to M.2 NVME which is only available on the 60 pin RB5 connector. If the RB% had a standard PCIe connector, this would have been best, but it does not.
Hi Peter
I will provide your information to hardware engineer, and get back to you