Dear All
Two 4012 modules are being tested.
* REF : SP242 Dev Kit
* CUS : QCA4012 Custom module
In the same F/W, CUS module is not connected to 5GHz AP ( 149, 153, 157, 161 Channel )
* 5Ghz 36 ~ 48 Channel connecting is fine.
* Problem with 5Ghz 149~161 channel only.
* REF module has no problem on all channels.
Which parts shoud I check?
Hello,
QCA4012 board(SP241/242) works in both 2.4G and 5G channels.
Need to flash dual band fw image of 1bit flash or 4bit flash.
Ex : raw_flashimage_AR401X_REV6_IOT_hostless_unidev_dualband_1bitflash.bin
Have you tried with multiple QCA4012 boards? or issue observed with a particualr board?
As you are able to connect to lower 5G channels (ch: 36~48), Make sure the uppper 5G channels are not over crowded.
Thanks,
Hi
The problem only occurs on the custom board.
My F/W image is as follows.
- raw_flashimage_AR401X_REV6_IOT_hostless_unidev_dualband.bin
How do I set up 1bitflash or 4bitflash?
thanks
Hi ,
Can you please let me know what is regulatory domain you have set ?Also do you able to scan AP on 149-161 AP. Please use wmiconfig --scan command to get the scan results. Also share your sniffer capture while trying to connect.
Thanks