Forums - CSRMesh Wiki

6 posts / 0 new
or Register
Last post
CSRMesh Wiki
eugch
Join Date: 20 May 17
Posts: 4
Posted: Sat, 2017-05-20 01:17
Top

Is this wiki site still active and updated? I am looking for the latest firmware for the CSRMesh Lighting Development kit and the associated Android mobile app software.

I was able to access this last year but the website is timing out now.

https://wiki.csr.com/wiki/CSRmesh

Any help to point me in the right direction is much appreciated, thanks.

  • Up0
  • Down0
Re: CSRMesh Wiki
Siddhesh
Join Date: 27 Sep 16
Location: Mumbai
Posts: 24
Posted: Sat, 2017-05-20 01:47
Top

 

You can get the latest firmware and associated mobile app in the QDN itself,

https://developer.qualcomm.com/hardware/csr101x/csrmesh-development-kit

Hope this helps.

Regards.

 

  • Up0
  • Down0
Re: CSRMesh Wiki
eugch
Join Date: 20 May 17
Posts: 4
Posted: Sat, 2017-05-20 03:51
Top

Thanks, that was exactly what I was looking for. :)

  • Up0
  • Down0
Re: CSRMesh Wiki
eugch
Join Date: 20 May 17
Posts: 4
Posted: Sat, 2017-05-20 04:36
Top

One other thing though, is v1.2 the latest for CSRMesh android control application ?

I seem to have an application note for V1.3 dated 13 July 2015. However, there is only v1.2 available for download at 

https://developer.qualcomm.com/hardware/csr101x/csrmesh-development-kit/...

Any idea where v1.3 for the android application is located or are there any newer versions?

I assume that the V1.3 of the firmware should be matched to V1.3 of the android app.

Thanks again.

  • Up0
  • Down0
Re: CSRMesh Wiki
eugch
Join Date: 20 May 17
Posts: 4
Posted: Tue, 2017-05-23 04:04
Top

Can anybody comment on the whereabouts of  v1.3 of the CSRmesh-Light controller Android App?

  • Up0
  • Down0
CSRMesh Beacon
shivashankar
Join Date: 8 May 18
Posts: 2
Posted: Tue, 2018-05-08 23:52
Top

Hello , 

we are using CSRMesh 1010 chip set for developing the beacon application .we want to use Mesh layers in the Beacon ,could you please tell how to  use meah libraries or protocol .this we want to use for configuring the beacon using mesh protocol .

please help in this .

 

Regards

ShivaShankar S

 

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.