Forums - Booting when powered?

2 posts / 0 new
or Register
Last post
Booting when powered?
tom.martinson
Join Date: 2 Jul 20
Posts: 3
Posted: Mon, 2020-11-30 10:47
Top

Is it possible to bypass the on/off switch so that the board powers / boots as soon as it is provided with power?

  • Up0
  • Down0
Re: Booting when powered? — Best Answer
mistry Moderator
Join Date: 18 Apr 18
Posts: 56
Posted: Tue, 2020-12-01 20:07
Top

Hi Tom,

Yes, this can be done by setting the Switch 3 (CBL_PWR_N) on Dip Switch 0 to ON.

More details on the Dip switch settings can be found here:

https://developer.qualcomm.com/qualcomm-robotics-rb5-kit/quick-start-guide/inside-the-qualcomm-robotics-rb5-kit

Hope this helps,

Rajan.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.