Forums - QCA 9377-3 based radio module certification

2 posts / 0 new
Last post
QCA 9377-3 based radio module certification
wolfram.wadepohl
Join Date: 8 Aug 19
Location: Metzingen
Posts: 4
Posted: Wed, 2021-06-09 04:35

We use the 8devices RedBean module based on QCA9377-3. Now we have to test the OEM radio device and nee to test

ETSI EN 300 328: RF output power, transmitter unwanted emissions spurious domain, receiver spurious emissions

ETS EN 301  893: RF output power, transmitter unwanted emisssions spurious doamin outside 5 GHz RLAN, transmitter spurious emissions within the 5 GHz RLAN, receiver spurious emissions.

The device has to be set into worst case mode (frequency, bandwidth, continous sending rsp. receiving).

We use the device under GNU/Linux 5.10 with the ath10k driver.

I do not know how to handle the above requests from the test lab.

  • Up0
  • Down0
ddeepakk Moderator
Join Date: 27 Jun 17
Posts: 117
Posted: Tue, 2021-06-22 06:10

Hi Wolfram,

Sorry, we don't support ath10k based software on this forum.

You can contact ath10k open source forum for this support.

Thanks.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.