Forums - QCA9377 Linux Device tree example

4 posts / 0 new
Last post
QCA9377 Linux Device tree example
nguyentrongthinhit
Join Date: 17 Jul 20
Posts: 2
Posted: Fri, 2020-07-17 02:19

I am using Linux kernel 5.4. I found that ath10k support QCA9377 SDIO mode. Can anyoine give me an example of Linux device tree that make ath10k work in SDIO mode? 

  • Up0
  • Down0
ddeepakk Moderator
Join Date: 27 Jun 17
Posts: 85
Posted: Mon, 2020-07-20 06:45

Hi Nguyen,

>>I found that ath10k support QCA9377 SDIO mode. 

Where did you find this info?

Thanks.

  • Up0
  • Down0
nguyentrongthinhit
Join Date: 17 Jul 20
Posts: 2
Posted: Mon, 2020-07-20 23:32

hi ddeepakk,

I look at the driver source code to find this information

The source code here https://github.com/torvalds/linux/blob/master/drivers/net/wireless/ath/ath10k/core.c

See line 547

  • Up0
  • Down0
ddeepakk Moderator
Join Date: 27 Jun 17
Posts: 85
Posted: Wed, 2020-07-22 12:19

Hi Nguyen,

From the info I have, the QCA9377 Firmware that is released for ath10k branch, only supports QCA9377 PCIe.

Please check ath10k forums for your question. This forum is for QCA9377 SDIO SDK that is released from developer.qualcomm.com only.

Thanks.

  • Up1
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.