Forums - Coexistence LTE and control signals

2 posts / 0 new
Last post
Coexistence LTE and control signals
yann.amalvy
Join Date: 12 Feb 20
Posts: 2
Posted: Mon, 2020-03-02 06:31

Hello,

I want to connect QCA9377 with a LTE module.

But I didn't understand how to use the LTE coexistence pins with WLAN and BT.

Where and how do you connect the following 5 pins: LTE_UART_RXD, LTE_UART_TXD, WLAN_RFKILL_L, 3D_FRAME_SYNC and QOW?
Do you have an example of a reference design between the QCA9377 and an LTE module?
What is the scheme to implement to use this LTE coexistence?
 
Thank you very much for your help.
Best Regards
  • Up0
  • Down0
ddeepakk Moderator
Join Date: 27 Jun 17
Posts: 85
Posted: Mon, 2020-03-02 21:35

Hi Yann,

Have you checked the Device Spec. docs at https://developer.qualcomm.com/hardware/qca9377-x/tools ?
There are Pin-descriptions and there are Pin numbers for Coex as well.

We have the Reference Design and HW docs but they aren't available to be shared on open forums.
I'd suggest you to get help from the vendor from whom you bought QCA9377 modules.
Or else, to get access to Qualcomm internal documents and other proprietary resources, you may contact sales team at https://assets.qualcomm.com/contact-sales-iot.html  .

Thanks.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.