Forums - Total clients when using multiple Soft-APs

2 posts / 0 new
Last post
Total clients when using multiple Soft-APs
dmastain
Join Date: 15 Jul 19
Posts: 1
Posted: Mon, 2019-07-15 12:22

We are developing for the QCA9377-3 and it isn't clear to us how many total clients are supported. The documentation states that a maximum of 10 clients are supported by the AP. Is this a hardware limitation or a software limitation?

In other words, if we configured two Soft-APs would we be limited to 10 total clients across both of these or would the lmit be 10 per an AP allowing for a total of 20 clients?

Thanks for any information you can provide.

  • Up0
  • Down0
ddeepakk Moderator
Join Date: 27 Jun 17
Posts: 41
Posted: Mon, 2019-07-15 21:20

Hi,

10 clients is a HW limitation. So, if you bring up 2 APs, they can support a total of 10 clients.

Thanks.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.