Forums - [BT] qca9377- hciattach throws the error 'Frame reassembly failed (-84)'

2 posts / 0 new
Last post
[BT] qca9377- hciattach throws the error 'Frame reassembly failed (-84)'
tony.kn
Join Date: 18 May 18
Posts: 1
Posted: Fri, 2018-05-18 03:01

Hi

We are using an NXP iMX6ull based design with qca9377 chip for both WiFi and BT

Our kernel version is 4.1 based and we have ported the latest AIO driver for this board.

After porting WiFi driver works fine, but bluetooth does not work with hciattach command.

Driver tries to load the firmware files- nvm_tlv_usb_tf_1.1.bin and rampatch_tlv_usb_tf_1.1.tlv and when we try hciattach command , it gives the error "Frame reassembly failed (-84)"

If we dont load the firmware files and use btattache command, BT driver works fine but with stack version 4.1.

Please let me know what I am missing here..

 

 

 

  • Up0
  • Down0
matadeen
Join Date: 12 Oct 17
Posts: 12
Posted: Wed, 2018-06-20 02:02

Could you please let us know which Software product you are using qca9377.lea_.1.0? or qca9377.lea_.2.0.

Also what all patch you have applied for the Bluetooth ? please share that patch.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.