Forums - Higher current consumption seen for QCA4020 with and without deep sleep mode

2 posts / 0 new
Last post
Higher current consumption seen for QCA4020 with and without deep sleep mode
karthik.gunturi
Join Date: 14 Apr 22
Posts: 3
Posted: Thu, 2022-06-23 21:37

Observing very high current with QCA4020 at J22 pin.

Tested on QCA4020 using QCLI demo 

{lp->deepsleep 0 } gives current of 69mA

{lp-> deepsleep 1 }n gives current of 73mA

There's only difference of 3mA for active mode vs deepsleep mode. Is there an explanation for this from software perspective or any possible leakage from malfunctioning external capacitor. Please help me understand the issue and provide any inputs on datasheet measured values for deepsleep and active modes

  • Up0
  • Down0
raja_pedada
Profile picture
Join Date: 18 Jun 18
Location: San Jose
Posts: 317
Posted: Mon, 2022-08-08 19:13

Is the power measurement part of IMPS or active activity ?
Kindly refer to Document: 80-YA121-147 QCA402x (CDB2x) Power Measurement Test Guide  for information on commands to verify system power and use case.
Refer to latet QCA402x SDK release notes for appropriate power dashboard use case values.

 

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.