Forums - Continuous mode for FCC Testing

3 posts / 0 new
Last post
Continuous mode for FCC Testing
Join Date: 1 Mar 17
Posts: 3
Posted: Wed, 2017-03-08 15:19

We need to be able to put the QCA4004 into continuous transmit mode to support FCC testing.

Is there a command or series of commands that support this?

  • Up0
  • Down0
Join Date: 14 Jan 16
Posts: 19
Posted: Fri, 2017-09-29 02:47

Dear Customer,

We're use the art2 to FCC test under art2 ->

art2 also support GUI or commands but you need to argeement with Qualcomm NDA.

Then you can download that.



  • Up0
  • Down0
Join Date: 21 Jun 18
Posts: 2
Posted: Tue, 2018-08-21 02:26

We are looking for the QRCT (Qualcomm Radio Control Test) package to test our new product that integrates the QCA6564A chipset. Can you tell us exactly how to get this software?

Note: the QCA6564A is integrated on the ConnectCore iMX6UL module from Digi.The processor that drives the component runs on Linux 4.9.65.

Best regards,

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.