Forums - QCA9882 Ath10 driver, 802.11r not working

2 posts / 0 new
Last post
QCA9882 Ath10 driver, 802.11r not working
chris-zq.liu
Join Date: 13 May 23
Posts: 2
Posted: Sat, 2023-05-13 08:15

working fast roaming 802.11r with QCA9882, and ath10k driver.

Linux platform with wpa_supplicant, if set FT-PSK,  when client roam to new AP,

wpa_supplicant complain: FT: failed to write PTK to driver

so it seems the roaming process is done and associated to new AP, however, the traffic can not go, that means, ping/traffci has no repsonse.

suspect, 802.11r not enable in driver side. How to check ?

 

  • Up0
  • Down0
handzhu
Join Date: 6 Jun 22
Posts: 55
Posted: Wed, 2023-05-17 06:42

Hi

sorry, but here is the topic of HDK device. 

for your issue, If you have source code, I think you can add some debug prink on kernel driver side.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.