Forums - MIPI CSI CTLE configuration for HDK8450

2 posts / 0 new
Last post
MIPI CSI CTLE configuration for HDK8450
Join Date: 22 Sep 21
Posts: 1
Posted: Tue, 2022-09-06 19:44

We made an adaptor board to connect our camera board to HDK8450, and the channel length is about 25cm. The CPHY speed requirement is 4Gsps. 

We use MIPI CSI0/CSI1/CSI2 interface of HDK8450.

Would you please help to tell us which register is to set these CSI CPHYs EQ strength? 


  • Up0
  • Down0
Join Date: 6 Jun 22
Posts: 54
Posted: Wed, 2022-09-07 05:58

Sorry for that but adding a new camera module needs to compile the driver code on top of Qualcomm release, and MIPI connection details should be covered by the customer document. Unfortunately, the code and document is only valid to a licensed customer but not visible at QDN. 

If you really need it, suggest you to contact with Qualcomm business team and get the support from customer support channel.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.