Hi,
Is the schematic available for the IoT Lighting board (H13323v4)? I have access to the CSRsupport portal, but do not see it available there either.
It would be very helpful for development.
Thanks,
Brian.
Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.
https://www.csrsupport.com/document.php?did=49975
That is the schematic for the H13323v1 with the CSR1010, but I am still unable to find the schematic for the H13323v4 board with the CSR1025.
Thanks.
Where can we find these Schematics on Createpointe?
Mistry,
The only thing you need is standard schematics and the connection to the light use any GPIO you like.
You can use PWM to change the brightness.
You can call my Skype nissim.test
Hi Nassim,
where can I find the schematics for the IoT-development board?
There is a relay on the board and I want to use it. Where can i find the information that can get me started?
It is best not to move forum conversations to skype.
The community will benefit more if we use the forums to answer such questions.
Best Regards,
Rajan Mistry.
There are schematics posted for smart watch application board and smart remote application board here:
https://developer.qualcomm.com/hardware/csr102x/tools
But I cannot find the schematics for the IoT development board and other boards.
Where can I find them?
There is not much information available on the relay that is on the Board.
Having the schematic would really help to find out which GPIO the relay is connected.
The schematic for the IoT board is not available on QDN. Please contact sales, https://www.qualcomm.com/contact/sales, for access. Is there information the forum may be able to answer in lieu of the schematic?
Bnickol
You do not need the schematics to find the relay hook to on of GPIO
Just send 1 or 0 to every free GPIO, one by one, and you find it in 10 min.
-Nissim
it is meanwhile 2020 ... we would like to start developing now with our two IOT Development Kit we purchased recently. Can you please provide a download link to the schematic of the board? Thanks!
As much as I would like to help you, its unfortunate that I cannot share the Schematics. However I am happy to share any PIO details that you might need.
Switches: SW1 - PIO 24; SW2 - PIO 23; SW3 - PIO 22
Relay - PIO 21
I2C Sensor: SCL - PIO 16; SDA - PIO 15, EVENT - PIO 14
LEDs: WHITE - PIO 7; RGB (PIO 4,5,6)
PIR - AIO 0
UART PADS: RX- PIO 9, TX - PIO 8
The professional kit is an overkill and documentation for that is also not easy to get. Especially if you are not enrolled for direct support from Qualcomm.
I would suggest anyone trying to develop with CSR102x to get a Starter Kit. This board needs no documentation as such. Pins are well labelled on the silkscreen.
An IOT Kit is a good investment if you are using that for demo of a CSRmesh application. It has limited uses beyond demo purposes. Any practical product development would need a custom HW development.
Do let me know the specifcs of the product you are trying to develop. I will try helping you out as best I can.