Forums - CSR1010 is not Detected

2 posts / 0 new
or Register
Last post
CSR1010 is not Detected
Tritek
Join Date: 15 Jun 16
Location: Mumbai
Posts: 24
Posted: Sun, 2016-08-07 22:37
Top

Hello,

I am trying to bring-up my custom PCB which has CSR1010. I am trying to CSR1010 using CSR USB to SPI board (DK-USB-SPI-10225-1A). 

CsConfig and xIDE gives me error the Hardware is not detected.

"*** Failed to detect hardware on Debug Transport 'SPITRANS=USB SPIPORT=0' Project property: Target Hardware 'CSR101x A05'. Stop."

Here are voltage readings from CSR1010 :

1. VDD_BAT (pin 1) = 3V

2. VDD_REG_IN (pin 6) = 2.08V

3. VDD_CORE (pin 5) = 1.82V

4. XTAL_16M_IN (pin 10) = 16MHz sine wave with peak-to-peak 740mV

5. XTAL_32K_IN (pin 3) => Here I am using a clockout from RTC as an input. Wave is : Square wave with peak-to-peak 3.28V

6. PIO[2] (pin 27) = 3V

Do voltage levels look correct? As per Hardware guidelines VDD_REG_IN should be : 1.35V~0.8V and VDD_CORE should be : 1.2V~0.65V

Thanks,

Sanika

  • Up0
  • Down0
Re: CSR1010 is not Detected
Dr. Nissim Zur
Profile picture
Join Date: 6 Jun 16
Location: Skype: nissim.test CSR1010 External design house
Posts: 235
Posted: Sat, 2016-08-27 10:33
Top

Did you place PIO_SPI = high ? (3V)

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.