Forums - CSR1012 without EEPROM/Flash x Host MCU => How to load CSR1012 Firmware and Control it from Host MCU

2 posts / 0 new
Last post
CSR1012 without EEPROM/Flash x Host MCU => How to load CSR1012 Firmware and Control it from Host MCU
zknunes
Join Date: 10 Mar 17
Posts: 6
Posted: Thu, 2019-03-28 07:48

CSR1012 is being used along with a  Cortex M0+ MCU and no external EEPROM neither Flash Memory. The  Cortex M0+ MCU has to download the software into  CSR1012   and then control it thru the UART interface (RCALLs).

Having that said, can you please help on proving  an  app note  showing how to download the software into CSR1012 from the Host MCU (SPI Debug Interface), and whether there is a code example to make CSR1012  working with Commands received from MCU thru the UART interface (Remote Calls).

 

  • Up0
  • Down0
jonesm
Join Date: 13 Jun 16
Posts: 79
Posted: Thu, 2019-03-28 09:02

For information on this please direct this request to Qualcomm Sales, https://www.qualcomm.com/contact/sales, or Qualcomm Distributors, https://www.qualcomm.com/contact/distributors.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.