Forums - about i2c speed when power on

2 posts / 0 new
Last post
about i2c speed when power on
Join Date: 20 Oct 16
Posts: 1
Posted: Thu, 2016-10-20 20:54


As we know,when power on,CSR1010 will load the program from EEPROM,the i2c speed is 400kHz,can we using 100kHz ? how?


  • Up0
  • Down0
Join Date: 22 Nov 16
Posts: 2
Posted: Tue, 2016-11-22 08:54

According to i2c.h, "The speed of the bus (standard mode, i.e. up to 100kHz or fast mode, i.e. up to 400kHz) is configured with PSKEY_I2C_CONFIG." 

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.