Forums - CSR8670 DevKit does not work.

2 posts / 0 new
or Register
Last post
CSR8670 DevKit does not work.
ys.kook
Join Date: 27 Feb 17
Posts: 1
Posted: Sun, 2018-03-18 18:05
Top

Dears,

My CSR8670 DevKit(CNS10001v4) suddenly did not work.

The board worked until the day before.

 

The issue is that don't  almost connected via BlueFlash, BlueTest.

The erroe message is below.

    - BlueFlash

        Error detecting chip type (Read failed on USB-SPI)

 

    - BlueTest

        Opening USB SPI (398887).

        Failed to open USB SPI (398887).

 

Even if the board is connected, it is happened as below error message.

    pscli -trans "SPITRANS=USB SPIPORT=xxxxx" @bcsp @hci_external : concluded with Failure

    Please check the IC is running, need to reset IC and reconnect.

 

Is my CSR8670 DevKit(CNS10001v4)  broken?

Or Software problem?

 

If this is HW problem, can it repair? Or can I have to buy new CSR8670 DevKit?

 

Please help me.

 

Thank you

  • Up0
  • Down0
Re: CSR8670 DevKit does not work.
jonesm
Join Date: 13 Jun 16
Posts: 79
Posted: Tue, 2018-03-20 09:34
Top

The CSR8670 is not supported by this forum. For support, please contact local sales, https://www.qualcomm.com/contact/sales, or a local distributor/rep, https://www.qualcomm.com/contact/distributors.

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.