Hi,
I have installed SDK for CSRB5342 but there is no firmware in the installed SDK. Without firmware i can't build any applications. How can i download the firmware?
CSRB5342 Firmware issue
Posted: Tue, 2018-07-03 23:52
Forums - CSRB5342 Firmware issue
Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.
The firmware is in ROM. What example application are you using and what error are you seeing?
I am just building a Hello world program that contains only single printf function. Building got success but when i try to flash i am getting
"Chip detected is vultan, default execution mode for this hardware is assisted
C:/CSRB534X_SDK-1.0.7-Release/tools/Makefile.vm:242: *** Unable to find suitable unified firmware for the vultan hardware you are using. Stop.
Finished."
Is there any configuration required? Please assist me to solve above problem.
In Project->Properties->Build System, change the following:
Execution Mode = Assisted Native
BlueCore hardware = BlueCore8-Ext (CSRB534x)
Storage Type = SQIF only
Generate default partition file = Yes
Automatically erase the SQIF device = Yes
With the above changes I have a Hello World program working. Let me know if this works for you.
It's worked for me also. Thaks for helping.