Forums - How to get QCA4004's MAC addr!

4 posts / 0 new
Last post
How to get QCA4004's MAC addr!
gavin0
Join Date: 20 Nov 14
Posts: 4
Posted: Tue, 2014-12-02 05:43

How to get QCA4004 MAC?  qcom_read_mac() doesn't work.

  • Up0
  • Down0
gavin0
Join Date: 20 Nov 14
Posts: 4
Posted: Wed, 2014-12-03 02:23

beg help! beg help!

  • Up0
  • Down0
epawlak Moderator
Join Date: 18 Feb 14
Posts: 6
Posted: Wed, 2014-12-03 08:49

The following command should work.

 

shell> wmiconfig --ipconfig

 

mac addr    =   00:03:7f:01:02:88

IP:c0a80101 Mask:ffffff00, Gateway:0

IP:192.168.1.1 Mask:255.255.255.0, Gateway:0.0.0.0

HostName: QCA4002

Link-local IPv6 Address ..... : FE80::203:7FFF:FE01:288/64

Global IPv6 Address ......... : ::

Default Gateway  ............. : ::

Global IPv6 Address 2 ......... : ::

shell>

  • Up0
  • Down0
gavin0
Join Date: 20 Nov 14
Posts: 4
Posted: Wed, 2014-12-03 17:16

Thanks a lot! qcom_mac_get() is the reading mac api!

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.