Forums - Snapdragon_Auto SA8195P flashing issue

3 posts / 0 new
Last post
Snapdragon_Auto SA8195P flashing issue
ro20268858
Join Date: 9 Mar 22
Posts: 1
Posted: Wed, 2022-05-11 04:21

Hi,

I wanted to flash Android 11 on SA8195P, hence i built android code and chip code as per documentation (source :https://docviewer.qualcomm.com/releasenote/RNO-211002234111). Used vendor prebuits of https://createpoint.qti.qualcomm.com/planner/link/search/newReleaseHisto... in android code as per documentation.
On the first try, i flashed only HLOS images. Then in logged into fastboot userspace and flashed system.img. Basically due to some error now device is not booting normally or in fastboot mode.
 
After above issue, I tried below methods to flash :
 
1. I tried by forcing fastboot (S7 long press) and flashing it. You can find logs here : https://pastebin.com/raw/pYPpQGJ7
Note : It required BTFM.bin file which is not provided in the code by qualcomm hlos dev chipcode for 8195. I just used 8155 file
 
2. I also tried with QFIL using linux qdl tool. You can find logs here : https://controlc.com/c933fdd7 . I switch S3 pin 7 to turn on EDL mode and flash it.
 
Both the cases it is getting flashed successfully. But once i reboot, device is not getting detected i.e doesn't boot in fastboot mode or normal mode.
 
Please help me out to resolve this issue
  • Up0
  • Down0
mengdiz
Join Date: 6 Dec 21
Posts: 27
Posted: Wed, 2022-05-18 23:02

Hi 

Could you try to flash boot.img vendor_boot.img vbmeta.img vbmeta_system.img super.img in bootloader?

If it boot up failed, please collect boot up uart log.

  • Up0
  • Down0
ammaruf15
Join Date: 21 Jul 22
Posts: 1
Posted: Thu, 2022-07-21 08:07

Can you help me find UART TX RX GND pinouts on this SA8195P ?

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.