Hi everyone,
1) Where can I get the firmware for AWS IoT for QCA4010 module?
2) How can I get the " raw_flashimage_AR401X_REV6_IOT_MP1_hostless_ap+sta_mcc+aws_singleband_4bitflash.bin " file?
Hi everyone,
1) Where can I get the firmware for AWS IoT for QCA4010 module?
2) How can I get the " raw_flashimage_AR401X_REV6_IOT_MP1_hostless_ap+sta_mcc+aws_singleband_4bitflash.bin " file?
Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.
Hi ,
For AWS image you need to
6.3.2 AWS IoT demo build To build the AWS IoT demo:
1. Set up the environment variables required for building the binary image. source sdkenv.sh
2. Build the IoT demo. cd demo/aws/ make
3. Select the tunable_input file and modify this file according to the build image type:
cd .../../tool/ cp tunable/tunable_input_mp1_hostless_4bitflash.txt tunable/tunable_input.txt
echo OP_FLAVOR 9 >> tunable/tunable_input.txt
echo "export FLASH_FLAVOR=\"_IOT_MP1\"" >> tunable/tunable_input.txt
4. Run Qonstruct. ./qonstruct.sh --qons tunable/follow below instruction to build image.
This will generate raw_flashimage_AR401X_REV6_IOT_MP1_hostless_ap+sta_mcc+aws_singleband_4bitflash.bin .
Please download the UG from below link
https://developer.qualcomm.com/download/qca4010/qca4010-sdk-2-1-user-gui... .
In this please check section 6 AWS IoT demo.
While compile you may get one error. So please do below modification in sdk AWS demo Makefile.
Under LDFLAGS, change -Tsdk_shell.ld to aws_demo.ld.
Hope it clarifies your doubt.
Regards
jyotiranjan
Hi,
I got the error as below during step "2. Build the IoT demo. cd demo/aws/ make"
In Makefile replace sdk_shell.ld with aws_demo.ld under LDFLAGS.
Hi,
How do I solve the below error?
Hi,
How do I solve the problem below?
Hi It is presnt inside SDK
Yes I have all that file.
How about the sdkenv.sh file. Do I need to setup anything?
Hi,
1) How can I setup the QCA4010 module to connect with wifi?
2) Any specific command do I need to use?
Hi,
1) How can I access to the command below for aws iot setup?
Hi,
In answer to your question, this command is used to Connect to the AWS IoT server and update the value of shadow.
Are you not able to connect to AWS server using this command?
Before that you need to create an AWS profile. Please follow below procedure:
1. Create an AWS profile in https://console.aws.amazon.com/console/home
2. Select My Security Credentials under username in the top right section of the window.
3. Select Get started with IAM users, select Add user, give a username and select Programmatic access.
4. Create a group and set permission for demo as add user to group.
5. The credentials.csv file is created. Download the file and move it to the DUT.
This is the one time setting which binds the Amazon AWS credentials to this device.
Thanks,
Santhosh
Hi all,
How to run the SharkSSLParseCert.exe as intruction below? Because when I run the SharkSSLParseCert.exe it just pop-up for a second.
Hi Firdaus,
In the sdk demo code sharkssl certificates were present in the below location.
qca4010-tx-2-2-qca_oem_ext.git/target/tool/linux/
SharkSslParseCAList
SharkSslParseCert
SharkSslParseKey
In the QCA4010 user guide, see certificate management demo
1. Convert certificate to SharkSSL binary format.
a. Generate binary certifcate file.
SharkSSLParseCert foo.pem foo.key -b foo.cert.bin
b. Generate binary CA List file.
SharkSSLParseCAList -b foo.calist.bin foo.pem
Thanks,
Santhosh
Please look at Certificate mangement demo in UG. Please follow UG and it will help you a lot . Are you able to run demo now?
Hi,
I am also encountering the same problem, if you have already solved it, please let me know how you did. Thanks
Hi,
I am also encountering the same problem, if you have already solved it, please let me know how you did. Thanks
When building the Onboard_demo from qca4020-or-3-3_qca_oem_sdk-cdb-master using make, the build fails due to a missing header file:
../../src/onboard.c:73:29: fatal error: timer_interface.h: No such file or directory
#include "timer_interface.h"
Are there any instructions explaining how to prepare this demo to be built?
Thanks,
Tom