When I flash a performance build on the RB5 it won't boot. This ist the debug output:
UEFI Total : 520 msPOST Time [ 1779] OS LoaderLoader Build Info: Sep 14 2021 13:47:22VB: Non-secure device: Security State: (0xF7F)VB: RWDeviceState: Succeed using devinfo!KeyPress:258, BootReason:0Fastboot=0, Recovery:0GetVmData: making ScmCall to get HypInfoGetVmData: No Vm data present! Status = (0x3)VM Hyp calls not presentBooting from slot (_a)Booting Into Mission ModeLoading Image Start : 1797 msLoading Image Done : 1797 msTotal Image Read size : 4096 BytesLoading Image Start : 1797 msLoading Image Done : 1819 msTotal Image Read size : 20979712 BytesLoading Image Start : 1825 msLoading Image Done : 1851 msTotal Image Read size : 25165824 BytesIn Ubuntu ab ota platform, we don't use the system_a / _b slotGetVmData: making ScmCall to get HypInfoGetVmData: No Vm data present! Status = (0x3)No Ffbm cookie found, ignore: Not FoundMemory Base Address: 0x80000000Decompressing kernel image start: 1853 msDecompressing kernel image done: 2224 msDtbo hdr magic mismatch 0, with D7B7AB1EBest match DTB tags 455/0000000B/0x00000003/20001/3001E/20020/3001F/20021/(offset)0x9A80C2B5/(size)0x0008D0C6Using pmic info 0x3001E/0x20020/0x3001F/0x20021 for device 0x3001E/0x20020/0x3001F/0x20021Memory Base Address: 0x80000000Cmdline: noinitrd earlycon=msm_geni_serial,0xa90000 androidboot.hardware=qcom androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1 video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237 service_locator.enable=1 androidboot.uRAM PartitionsAdd Base: 0x0000000080000000 Available Length: 0x000000003B800000Add Base: 0x0000000180000000 Available Length: 0x0000000100000000Add Base: 0x00000000C0000000 Available Length: 0x00000000C0000000ERROR: Could not get splash memory region nodekaslr-Seed is added to chosen nodeShutting Down UEFI Boot Services: 2297 msStart EBS [ 2297]BDS: LogFs sync skipped, UnsupportedApp Log Flush : 40 msExit EBS [ 2355] UEFI End
After this it just hangs. I have tried flashing with the SDK-Manager and also with turbox_flash_flat.sh. The debug-versions boot normally.
Can someone point me in the right direction?