Hi All,
I am running OnBoard Demo with cloud on my QCA4020 Dev Kit.
Everything is working but zigbee is not initializing.
First BLE connection with the androoid app is done then Wifi credentials has been updated through the App and wifi connection is successfully done.
After that app starts fetching the zigbee and updates the QCA4020 with link key and op mode as Coordinator.
But Zigbee is not initializing
Onboard: Waiting for Onboard events ...
Onboard: Read Request from BLE
Onboard: Read Request from BLE is_wifi_onboarded()
Onboard: WLANCB: dID:1, cbID:0, val:1
Onboard: Connect event on devId:1 val:1
Onboard: devid - 1 1 CONNECTED MAC addr 40:3f:8c:f4:83:ff
Onboard: Read Request from BLE
Onboard: Read Request from BLE is_wifi_onboarded()
Onboard: Read Request from BLE
Onboard: Read Request from BLE is_wifi_onboarded()
Onboard: WLANCB: dID:1, cbID:0, val:10
Onboard: Connect event on devId:1 val:10
Onboard: 4 way handshake failure for device=1
Onboard: IPADDR:0, MSK:0, GW:0
Onboard: Getting ip from dhcp server .........
Onboard: total used free
Onboard: Heap: 161792 134032 27760
Onboard: mutex unlock done ---------
Onboard: waiting on Monitor thread
Onboard: Zigbee LinkKey Nl9TaO3Ry0mWf2wh
Onboard: Zigbee Mode c
Onboard: Initiate Zigbee Onboarding
Onboard: Op_Mode:c
Onboard: Master_key=Nl9TaO3Ry0mWf2wh
Onboard: bytes_written num = 1
Onboard: bytes_written num = 16
Onboard: Rised signal: 4
Onboard: config_zigbee
Onboard: Starting Zigbee
Onboard: Starting ZB CO-Ordinator
Onboard: FAILED qapi_ZB_Initialize
Onboard: Failed to Initialize Zigbee Stack
Onboard: Failed to config Zigbee
Onboard: Waiting for Onboard events ...
What step AM i missing ?
I am not connecting the Zigbee End Device.
Thanks and appreciates for any help.