  telux | DeviceConfig provides utility functions to get device configuration details such as multi SIM support |
  audio | |
  FormatParams | |
| AmrwbpParams | |
| StreamConfig | |
| FormatInfo | |
| ChannelVolume | |
| StreamVolume | |
| StreamMute | |
| StreamBuffer | |
| DtmfTone | |
| AudioFactory | AudioFactory allows creation of audio manager |
| IVoiceListener | Listener class for getting notifications related to DTMF tone detection. The client needs to implement these methods as briefly as possible and avoid blocking calls in it. The methods in this class can be invoked from multiple different threads. Client needs to make sure that the implementation is thread-safe |
| IPlayListener | |
| ITranscodeListener | |
| IAudioListener | |
| IAudioBuffer | Stream Buffer manages the buffer to be used for read and write operations on Audio Streams. For write operations, applications should request a stream buffer, populate it with the data and then pass it to the write operation and set the dataSize that is to be written to the stream. Similarly for read operations,the application should request a stream buffer and use that in the read operation. At the end of the read, the stream buffer will contain the data read. Once an operation (read/write) has completed, the stream buffer could be reused for a subsequent read/write operation, provided reset() API called on stream buffer between subsequent calls |
| IStreamBuffer | |
| IAudioManager | Audio Manager is a primary interface for audio operations. It provide APIs to manage Streams ( like voice, play, record etc) and sound cards |
| IAudioDevice | Audio device and it's characteristics like Direction (Sink or Source), type |
| IAudioStream | IAudioStream represents single audio stream with base properties |
| IAudioVoiceStream | IAudioVoiceStream represents single voice stream |
| IAudioPlayStream | IAudioPlayStream represents single audio playback stream |
| IAudioCaptureStream | IAudioCaptureStream represents single audio capture stream |
| IAudioLoopbackStream | IAudioLoopbackStream represents audio loopback stream |
| IAudioToneGeneratorStream | IAudioToneGeneratorStream represents tone generator stream |
 ITranscoder | ITranscoder is used to convert one audio format to another audio format using the transcoding operation |
| common | |
| ICommandCallback | |
| ICommandResponseCallback | General command response callback for most of the requests, client needs to implement this interface to get single shot response |
| IServiceStatusListener | |
| DeviceConfig | |
| Log | |
| SdkVersion | |
| Version | Provides version of SDK |
| config | |
| ConfigFactory | ConfigFactory allows creation of config related classes |
| ConfigInfo | |
| IModemConfigListener | Listener class for getting notifications related to configuration change detection. The client needs to implement these methods as briefly as possible and avoid blocking calls in it. The methods in this class can be invoked from multiple different threads. Client needs to make sure that the implementation is thread-safe |
| IModemConfigManager | IModemConfigManager provides interface to list config files present in modem's storage. load a new config file in modem, activate a config file, get active config file information, deactivate a config file, delete config file from the modem's storage, get and set mode of config auto selection, register and deregister listener for config update in modem. The config files are also referred to as MBNs |
| cv2x | |
| ICv2xConfigListener | Listeners for ICv2xConfig must implement this interface |
| ICv2xConfig | Cv2xConfig provide operations to update or request cv2x configuration |
| Cv2xFactory | Cv2xFactory is the factory that creates the Cv2x Radio |
| ICv2xRadio | |
| ICv2xRadioListener | Listeners for Cv2xRadio must implement this interface |
| ICv2xListener | Cv2x Radio Manager listeners implement this interface |
| ICv2xRadioManager | Cv2xRadioManager manages instances of Cv2xRadio |
| ICv2xRxSubscription | |
| ICv2xThrottleManagerListener | Listener class for getting filter rate update notification |
| ICv2xThrottleManager | ThrottleManager provides throttle manager client interface |
| ICv2xTxFlow | |
| ICv2xTxRxSocket | |
| data | |
| net | |
| BridgeInfo | |
| IBridgeManager | IBridgeManager provides APIs to enable/disable and set/get/delete software bridges for various WLAN and Ethernet interfaces. It also provides interface to Subsystem Restart events by registering as listener. Notifications will be received when modem is ready/not ready |
| IBridgeListener | |
| IFirewallManager | FirewallManager is a primary interface that filters and controls the network traffic on a pre-configured set of rules. It also provides interface to Subsystem Restart events by registering as listener. Notifications will be received when modem is ready/not ready |
| IFirewallEntry | Firewall entry class is used for configuring firewall rules |
| IFirewallListener | |
| L2tpSessionConfig | |
| L2tpTunnelConfig | |
| L2tpSysConfig | |
| IL2tpManager | L2tpManager is a primary interface for configuring L2TP Service. It also provides interface to Subsystem Restart events by registering as listener. Notifications will be received when modem is ready/not ready |
| IL2tpListener | |
| NatConfig | |
| INatManager | NatManager is a primary interface for configuring static network address translation(SNAT) and DMZ (demilitarized zone). It also provides interface to Subsystem Restart events by registering as listener. Notifications will be received when modem is ready/not ready |
| INatListener | |
| ISocksManager | SocksManager is a primary interface for configuring legacy Socks proxy server. It also provides interface to Subsystem Restart events by registering as listener. Notifications will be received when modem is ready/not ready |
| ISocksListener | |
| IVlanManager | VlanManager is a primary interface for configuring VLAN (Virtual Local Area Network). it provide APIs for create, query, remove VLAN interfaces and associate or disassociate with profile IDs. It also provides interface to Subsystem Restart events by registering as listener. Notifications will be received when modem is ready/not ready |
| IVlanListener | |
| IpFamilyInfo | |
| IDataConnectionManager | IDataConnectionManager is a primary interface for cellular connectivity This interface provides APIs for start and stop data call connections, get data call information and listener for monitoring data calls. It also provides interface to Subsystem Restart events by registering as listener. Notifications will be received when modem is ready/not ready |
| IDataCall | Represents single established data call on the device |
| IDataConnectionListener | |
| DataRestrictMode | |
| PortInfo | |
| ProfileParams | |
| DataCallStats | |
| IpAddrInfo | |
| DataCallEndReason | |
| VlanConfig | |
| DataFactory | DataFactory is the central factory to create all data classes |
| IDataFilterListener | Listener class for listening to filtering mode notifications, like Data filtering mode change. Client need to implement these methods. The methods in listener can be invoked from multiple threads. So the client needs to make sure that the implementation is thread-safe |
| IDataFilterManager | IDataFilterManager class provides interface to enable/disable the data restrict filters and register for data restrict filter. The filtering can be done at any time. One such use case is to do it when we want the AP to suspend so that we are not waking up the AP due to spurious incoming messages. Also to make sure the DataRestrict mode is enabled |
| DataProfile | DataProfile class represents single data profile on the modem |
| IDataProfileListener | Listener class for getting profile change notification |
| IDataProfileManager | |
| IDataCreateProfileCallback | |
| IDataProfileListCallback | Interface for getting list of DataProfile using callback. Client needs to implement this interface to get single shot responses for commands like get profile list and query profile |
| IDataProfileCallback | |
| IPv4Info | |
| IPv6Info | |
| UdpInfo | |
| TcpInfo | |
| IcmpInfo | |
| EspInfo | |
| IIpFilter | A IP filter class to add specific filters like what data will be allowed from the modem to the application processor. Only data packets that match the filter will be sent to the apps processor. Also used to configure Firewall rules |
| IUdpFilter | This class represents a IP Filter for the UDP, get the new instance from telux::data::DataFactory |
| ITcpFilter | This class represents a IP Filter for the TCP, get the new instance from telux::data::DataFactory |
| IIcmpFilter | This class represents a IP Filter for the ICMP, get the new instance from telux::data::DataFactory |
| IEspFilter | This class represents a IP Filter for the ESP, get the new instance from telux::data::DataFactory |
| DataCallEndReason.__unnamed__ | |
| loc | |
| IDgnssStatusListener | Listener class for getting RTCM injection event notification information |
| IDgnssManager | IRtcmManager provides interface to inject RTCM data into modem, register event listener reported by cdfw(correction data framework) |
| ILocationConfigurator | ILocationConfigurator allows for the enablement/disablement of the APIs such as CTunc, PACE, deleteAllAidingData, configureLeverArm, configureConstellations, configureRobustLocation, configureMinGpsWeek, requestMinGpsWeek, deleteAidingData, configureMinSVElevation, requestMinSVElevation, requestRobustLocation, configureSecondaryBand, requestSecondaryBandConfig, configureDR. ILocationConfigurator APIs strictly adheres to the principle of single client per process. ILocationConfigurator APIs follow the non persistence scheme, meaning when the processor crashes/reboots the settings need to be set again via the respective APIs |
| GnssKinematicsData | |
| LLAInfo | |
| TimeInfo | |
| GlonassTimeInfo | |
| SystemTimeInfo | |
| SystemTime | |
| GnssMeasurementInfo | |
| SvUsedInPosition | |
| GnssData | |
| SvBlackListInfo | |
| LeverArmParams | |
| GnssMeasurementsData | |
| GnssMeasurementsClock | |
| GnssMeasurements | |
| LeapSecondChangeInfo | |
| LeapSecondInfo | |
| LocationSystemInfo | |
| GnssEnergyConsumedInfo | |
| RobustLocationVersion | |
| RobustLocationConfiguration | |
| BodyToSensorMountParams | |
| DREngineConfiguration | |
| ILocationInfoBase | ILocationInfoBase provides interface to get basic position related information like latitude, longitude, altitude, timestamp |
| ILocationInfoEx | ILocationInfoEx provides interface to get richer position related information like latitude, longitude, altitude and other information like time stamp, session status, dop, reliabilities, uncertainities etc |
| ISVInfo | ISVInfo provides interface to retrieve information about Satellite Vehicles, their position and health status |
| IGnssSVInfo | IGnssSVInfo provides interface to retrieve the list of SV info available and whether altitude is assumed or calculated |
| IGnssSignalInfo | IGnssSignalInfo provides interface to retrieve GNSS data information like jammer metrics and automatic gain control for satellite signal type |
| LocationFactory | LocationFactory allows creation of location manager |
| ILocationListener | Listener class for getting location updates and satellite vehicle information |
| ILocationSystemInfoListener | |
| ILocationManager | ILocationManager provides interface to register and remove listeners. It also allows to set and get configuration/ criteria for position reports. The new APIs(registerListenerEx, deRegisterListenerEx, startDetailedReports, startBasicReports) and old/deprecated APIs(registerListener, removeListener, setPositionReportTimeout, setHorizontalAccuracyLevel, setMinIntervalForReports) should not be used interchangebly, either the new APIs should be used or the old APIs should be used |
| power | |
| PowerFactory | PowerFactory allows creation of TCU-activity manager instance |
| ITcuActivityListener | Listener class for getting notifications related to TCU-activity state and also the updates related to TCU-activity service status. The client needs to implement these methods as briefly as possible and avoid blocking calls in it. The methods in this class can be invoked from multiple different threads. Client needs to make sure that the implementation is thread-safe |
| ITcuActivityManager | ITcuActivityManager provides interface to register and de-register listeners to get TCU-activity state updates. And also API to initiate TCU-activity state transition. The system can be configured to be operated in ACTIVE or PASSIVE mode with respect to TcuActivity management. In ACTIVE mode, the TCU-activity management service leads the system into desired activity state after receiving the acknowledgements from all the clients or after the configured timeout. In PASSIVE mode, the management service just notifies the clients about the state transition and conveys their acknowledgement status back to the Master application that triggered the state transition |
| tel | |
| ICall | ICall represents a call in progress. An ICall cannot be directly created by the client, rather it is returned as a result of instantiating a call or from the PhoneListener when receiving an incoming call |
| ICallListener | A listener class for monitoring changes in call, including call state change and ECall state change. Override the methods for the state that you wish to receive updates for |
| ICallManager | Call Manager is the primary interface for call related operations Allows to conference calls, swap calls, make normal voice call and emergency call, send and update MSD pdu |
| IMakeCallCallback | Interface for Make Call callback object. Client needs to implement this interface to get single shot responses for commands like make call |
| ICardApp | Represents a single card application |
| IccResult | |
| ICardManager | |
| ICard | ICard represents currently inserted UICC or eUICC |
| ICardChannelCallback | |
| ICardCommandCallback | |
| ICardListener | |
| CellBroadcastFilter | |
| Point | |
| Polygon | |
| Circle | |
| Geometry | |
| WarningAreaInfo | |
| EtwsInfo | |
| CmasInfo | |
| CellBroadcastMessage | Cell Broadcast message |
| ICellBroadcastManager | CellBroadcastManager class is primary interface to configure and activate emergency broadcast messages and receive broadcast messages |
| ICellBroadcastListener | A listener class which monitors cell broadcast messages |
| GsmCellIdentity | |
| CdmaCellIdentity | |
| LteCellIdentity | |
| WcdmaCellIdentity | |
| TdscdmaCellIdentity | |
| CellInfo | |
| GsmCellInfo | |
| CdmaCellInfo | |
| LteCellInfo | |
| WcdmaCellInfo | |
| TdscdmaCellInfo | |
| ECallMsdOptionals | |
| ECallMsdControlBits | |
| ECallVehicleIdentificationNumber | |
| ECallVehiclePropulsionStorageType | |
| ECallVehicleLocation | |
| ECallVehicleLocationDelta | |
| ECallOptionalPdu | |
| ECallMsdData | |
| ECallModeInfo | |
| ECallHlapTimerStatus | |
| ECallHlapTimerEvents | |
| SlotStatus | |
| IMultiSimManager | MultiSimManager allows to perform operation pertaining to devices which have more than one SIM/UICC card. Clients should check if the subsystem is ready before invoking any of the APIs as follows |
| IMultiSimListener | Listener class for getting high capability change notification. The listener method can be invoked from multiple different threads. Client needs to make sure that implementation is thread-safe |
| PreferredNetworkInfo | |
| OperatorStatus | |
| INetworkSelectionManager | Network Selection Manager class provides the interface to get and set network selection mode, preferred network list and scan available networks |
| OperatorInfo | |
| INetworkSelectionListener | Listener class for getting network selection mode change notification |
| IPhone | This class allows getting system information and registering for system events. Each Phone instance is associated with a single SIM. So on a dual SIM device you would have 2 Phone instances |
| ISignalStrengthCallback | Interface for Signal strength callback object. Client needs to implement this interface to get single shot responses for commands like get signal strength |
| IVoiceServiceStateCallback | Interface for voice service state callback object. Client needs to implement this interface to get single shot responses for commands like request voice radio technology |
| SimRatCapability | |
| CellularCapabilityInfo | |
| PhoneFactory | PhoneFactory is the central factory to create all Telephony SDK Classes and services |
| IPhoneListener | A listener class for monitoring changes in specific telephony states on the device, including service state and signal strength. Override the methods for the state that you wish to receive updates for |
| IPhoneManager | Phone Manager creates one or more phones based on SIM slot count, it allows clients to register for notification of system events. Clients should check if the subsystem is ready before invoking any of the APIs |
| ICellularCapabilityCallback | |
| IOperatingModeCallback | |
| IRemoteSimListener | A listener class for getting remote SIM notifications |
| IRemoteSimManager | IRemoteSimManager provides APIs for remote SIM related operations. This allows a device to use a SIM card on another device for its WWAN modem functionality. The SIM provider service is the endpoint that interfaces with the SIM card (e.g. over bluetooth) and sends/receives data to the other endpoint, the modem. The modem sends requests to the SIM provider service to interact with the SIM card (e.g. power up, transmit APDU, etc.), and is notified of events (e.g. card errors, resets, etc.). This API is used by the SIM provider endpoint to provide a SIM card to the modem |
| CardReaderStatus | |
| ISapCardManager | ISapCardManager provide APIs for SAP related operations |
| IAtrResponseCallback | |
| ISapCardCommandCallback | |
| ICardReaderCallback | |
| ISapCardListener | |
| DcStatus | |
| IServingSystemManager | Serving System Manager class provides the API to request and set service domain preference and RAT preference |
| IServingSystemListener | Listener class for getting radio access technology mode preference change notification |
| SignalStrength | |
| LteSignalStrengthInfo | |
| GsmSignalStrengthInfo | |
| CdmaSignalStrengthInfo | |
| WcdmaSignalStrengthInfo | |
| TdscdmaSignalStrengthInfo | |
| Nr5gSignalStrengthInfo | |
| SimProfile | SimProfile class represents single eUICC profile on the card |
| ISimProfileListener | The interface listens for profile download indication and keep track of download and install progress of profile |
| ISimProfileManager | ISimProfileManager is a primary interface for remote eUICCs (eSIMs or embedded SIMs) provisioning.This interface provides APIs to add, delete, set profile, update nickname, provide user consent, get Eid on the eUICC |
| MessageAttributes | Contains structure of message attributes like encoding type, number of segments, characters left in last segment |
| SmsMessage | A Short Message Service message |
| ISmsManager | SMS Manager class is the primary interface to send and receive SMS messages. It allows to send an SMS in several formats and sizes |
| ISmsListener | A listener class for monitoring incoming SMS and notify subsystem status changes. Override the methods for the state that you wish to receive updates for |
| ISmscAddressCallback | |
| ISubscription | Subscription returns information about network operator subscription details pertaining to a SIM card |
| ISubscriptionListener | A listener class for receiving device subscription information. The methods in listener can be invoked from multiple different threads. The implementation should be thread safe |
| ISubscriptionManager | |
| VoiceServiceInfo | |
 therm | |
 ThermalFactory | ThermalFactory allows creation of thermal manager |
| BoundCoolingDevice | |
| IThermalManager | IThermalManager provides interface to get thermal zone and cooling device information |
| ITripPoint | ITripPoint provides interface to get trip point type, trip point temperature and hysteresis value for that trip point |
| IThermalZone | IThermalZone provides interface to get type of the sensor, the current temperature reading, trip points and the cooling devices binded etc |
| ICoolingDevice | ICoolingDevice provides interface to get type of the cooling device, the maximum throttle state and the currently requested throttle state of the cooling device |
| IThermalShutdownListener | Listener class for getting notifications when automatic thermal shutdown mode is enabled/ disabled or will be enabled imminently. The client needs to implement these methods as briefly as possible and avoid blocking calls in it. The methods in this class can be invoked from multiple different threads. Client needs to make sure that the implementation is thread-safe |
| IThermalShutdownManager | IThermalShutdownManager class provides interface to enable/disable automatic thermal shutdown. Additionally it facilitates to register for notifications when the automatic shutdown mode changes |
| current_dynamic_vehicle_state_t | |
| ExteriorLights_ut | |
| ExteriorLights_ut.bits | |
| high_resolution_motion_t | |
| socket_info_t | |
| static_vehicle_parameters_t | |
| trusted_ue_info_t | |
| tx_pool_id_info_t | |
| v2x_api_ver_t | |
| v2x_chan_meas_params_t | |
| v2x_chan_measurements_t | |
| v2x_config_event_info_t | |
| v2x_control_status_ut | |
| v2x_control_status_ut.bits | |
| v2x_gnss_fix_rates_supported_list_t | |
| v2x_GNSSstatus_t | |
| v2x_iface_capabilities_t | |
| v2x_init_t | |
| v2x_kinematics_capabilities_t | |
| v2x_kinematics_capabilities_t_feature_flags_t | |
| v2x_location_fix_t | |
| v2x_per_sps_reservation_calls_t | |
| v2x_radio_calls_t | |
| v2x_radio_macphy_params_t | |
| v2x_rates_t | |
| v2x_sid_list_t | |
| v2x_sock_info_t | |
| v2x_sps_mac_details_t | |
| v2x_tx_bandwidth_reservation_t | |
| v2x_tx_flow_info_t | |
| v2x_tx_sps_flow_info_t | |
| vehicleEventFlags_ut | |
| vehicleEventFlags_ut.bits | |
