Forums - How do I ensure that the system time is correct after an Huawei MA5616 resets?

3 posts / 0 new
Last post
How do I ensure that the system time is correct after an Huawei MA5616 resets?
adammorgan.198806
Join Date: 8 Mar 18
Posts: 2
Posted: Tue, 2018-07-24 01:44

How do I ensure that the system time is correct after an Huawei MA5616 resets?

  • Up0
  • Down0
maggiewang19971022
Join Date: 8 Mar 18
Posts: 3
Posted: Thu, 2018-07-26 01:16
After a reset, the Huawei MA5616 reads the time saved previously from the virtual static random access memory (VSRAM) and calculates the system time using a specified algorithm. The save command, which is run before a system reset, cannot save the system time.
 
To ensure that the system time is correct after a system reset, change the system time and run the following commands to save the time:
 
huawei(config)#diagnose
huawei(diagnose)%%save vsram 
   The information of VSRAM is saved to flash successfully
You can find more inforamtion about Huawei MA5616 by following the link: http://www.thunder-link.com/HUAWEI-MA5616_p596.html
  • Up0
  • Down0
jamesgunn
Join Date: 27 Jan 19
Posts: 1
Posted: Sun, 2019-01-27 20:57
Make sure you change the system time then run the following commands to save the time
huawei(config)#diagnose
huawei(diagnose)%%save vsram 
  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.