Forums - QCA4004 GPIO As Interrupt

1 post / 0 new
QCA4004 GPIO As Interrupt
renwei
Join Date: 6 Nov 15
Posts: 1
Posted: Fri, 2015-11-06 11:52

We are hitting some issue during tuning the QualComm QCA4004 SP141 development HW.
Our goal is to use one of the GPIO of QCA4004 as external interrupt to trigger some function in user application. As specified in Tunable document, GPIO pins can be configured as interrupt source by setting Interrupt Config field in GPIO active/inactive configuration.

But we don't have any resource to hook up the interrupt to event trigger inside our application thread based on ThreadX RTOS.
We searched the hostless SDK R334 but failed to find out the ISR part. Could someone share some info or experience about this? Thanks.

  • Up0
  • Down0

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.