Forums - Help me about OTA upgrade

2 posts / 0 new
or Register
Last post
Help me about OTA upgrade
yjr_1220
Join Date: 22 May 15
Posts: 2
Posted: Wed, 2015-07-22 18:34
Top

Hi dear all :

         I use qca4004-B hostless SDK!

         I meet a trouble, that when i make OTA upgrade finished then reboot the board but it can not run!

         I don,t know the reason!

         I use the command ota_fw_upgrade 192.168.1.100 ota.bin tftp to upgrade and my spi flash size is 2M bit.

         after OTA the log is:

         shell> ota_fw_upgrade 192.168.1.100 ota_image_AR400X_REV4_IOT_hostlesssingle.bin 0

         SOCK_OPEN: index 0 handle 4573344

         Image Received

         Checksum Verified

       _ip_sock_close sock:4573344

        SOCK_CLOSE: index 0 handle 4573344 res 0

        can you help me?

        thanks a lot!

  • Up0
  • Down0
Re: Help me about OTA upgrade
c_rayl
Join Date: 14 Jan 16
Posts: 19
Posted: Wed, 2016-07-13 20:50
Top

Dear Customer,

 

For example:

wmiconfig --connect ray_5G

wmiconfig --ipstatic 192.168.1.10 255.255.255.0 192.168.1.1

wmiconfig --ota_upgrade 192.168.1.66 ota_image_AR400X_REV4_IOT_hostless_unidev_dualband_iot_demo2.bin 0 0 0
 
wmiconfig --ota_done 1
 
Regards,
Ray

 

 

  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.