Forums - CSR1010 UART and SPI interface

1 post / 0 new
CSR1010 UART and SPI interface
rohinparkar
Join Date: 19 Nov 16
Posts: 5
Posted: Sat, 2016-11-19 23:42

Hi,

I just bought a CSR uEnery starter development kit with a CSR1010 module attached to MOD1.

How can I make sure I can download the compiled image to the flash on the CSR1010 module. The SPI Interface of CSR1010 is brought out onto the header J100. Do we need to connect jumper wires fron the SPI lines on J100 to the SPI lines coming out of U12 ?

Next I want to access the UART interface on CSR1010 for debugging purpose. Do we need to pick-up the UART lines from J100 and make a connector so we can use it with a USB-UART adapter ?

Thanks

Rohin

  • Up0
  • Down0

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.