Forums - SP143 ipconfig 2 can't resolve the ip.

1 post / 0 new
or Register
SP143 ipconfig 2 can't resolve the ip.
dongliang
Join Date: 5 Nov 14
Posts: 1
Posted: Mon, 2014-11-10 17:00
Top

sp143 firmware uart cmd ipconfig 0/2 can't resolve the ip as sta:

ath> show ap
Scan result count: 1:
0: SSID(len=14): Mercury_589F14, BSSID: 28-2c-b2-58-9f-14, channel: 6, beacon interval: 100, rssi: 64, caps: 0x0421, privacy disable, short preamble, ESS type network, rsn cipher: NA(0), rsn auth: NA(0), wpa cipher: NA(0), wpa auth: NA(0).
 
ath> connect_ap Mercury_589F14
 
ath> disconnectReason: 3, protocolReasonStatus: 3, assocRespLen: 0, BSSID: 28-2c-b2-58-9f-14
sc_numRxBufQueuedonWlan: 10, sc_numTxBufQueued: 0
TX Aggregation NOT allowed on tid 0
 
Disconnected from Mercury_589F14
 
ath> ipconfig 0Connected to Mercury_589F14, bssid = 28-2c-b2-58-9f-14, channel = 6, rssi = 62
 
ip_addr = 0.0.0.0, subnet_mask = 255.255.255.0, default_gw = 192.168.1.1, dns_server = 0.0.0.0
 
ath> ipconfig 2
 
ath> ipconfig 0
ip_addr = 0.0.0.0, subnet_mask = 255.255.255.0, default_gw = 192.168.1.1, dns_server = 0.0.0.0
 
ath> 
  • Up0
  • Down0

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.