Forums - CSR OTA parallel update

4 posts / 0 new
Last post
CSR OTA parallel update
vctrkarthik
Join Date: 24 Oct 16
Posts: 4
Posted: Mon, 2016-10-24 08:19

 

I used Android OTA app to update the CSR1010 chip over the air. I used hr_sensor app as an example for over the air update. When I upload the image file (hr_sensor_update.img),  it took 1 to 2 minute and updated perfectly. 

Problem is while the update is going on,  if I abort the process(interupting), the chip does not transmit anymore. Then I have to flash program using wire to make it work again.

My question is, is there anyway to make the chip work with older version in case OTAU failures?  In other words, when update is going on,chip should be running with older version and when update is complete, it should switch to new version. 

 

 

  • Up0
  • Down0
vctrkarthik
Join Date: 24 Oct 16
Posts: 4
Posted: Wed, 2016-10-26 13:34

No problem. I found the solution. I changed user key 0 value to be 0002. 

 

Thanks

  • Up0
  • Down0
mado.jessu
Join Date: 6 Oct 22
Posts: 27
Posted: Wed, 2023-07-26 01:02
Re: CSR OTA parallel update
  • Up0
  • Down0
Sjessus60
Join Date: 3 Oct 22
Posts: 28
Posted: Wed, 2023-07-26 01:06
Re: CSR OTA parallel update
  • Up0
  • Down0
or Register

Opinions expressed in the content posted here are the personal opinions of the original authors, and do not necessarily reflect those of Qualcomm Incorporated or its subsidiaries (“Qualcomm”). The content is provided for informational purposes only and is not meant to be an endorsement or representation by Qualcomm or any other party. This site may also provide links or references to non-Qualcomm sites and resources. Qualcomm makes no representations, warranties, or other commitments whatsoever about any non-Qualcomm sites or third-party resources that may be referenced, accessible from, or linked to this site.